Welcome To Rider Pitstop!
Please Note: Each Order We Receive Automatically Donates A Percentage Out Of Our Sale Amount To Ebay Charity Which Benefits "Direct Relief Program" (Improves The Health And Lives Of People Affected By Poverty And Emergency Situations By Equipping Healthcare Facilities In Resource-poor Areas With Medicines And Supplies. Direct Relief Provides Support In More Than 90 Countries And All 50 U.S. States, Both On An Ongoing Basis And During Emergency Situations).
You Are Requested To Ask Any Questions You May Have Before Ordering. If You Require Any Changes / Customization, Send Us A Message With All The Information And We Will Get Back To You. Please Do Not Order Until You Read Back From Us To Avoid Cancellation Charges / Problems Later.
Product Title Given For The Listing Describes Mostly Everything About The Brand And Models It Fits To (Please Also Check The Fitment Section If There Is Any In The Description). If You Have Any Other Questions, Please Feel Free To Contact Us Before Ordering.
Weld-on Efi Mounting Plate For Custom Diy Gas / Fuel / Petrol Tank. For 2004 And Later Sportster And 2018+ Softail Models Available In Mild Steel Or Stainless Steel In 4mm Thickness With 2.75mm Holes. You Will Require Threaded Tabs / Bungs And Welding According To Your Mounting Bolts.
Mail Response Time:
We Receive A Number Of Messages Daily And Work With Walk-in Customers. If You Need Clarification About Anything Or Have A Question That Is Not Addressed In The Listing, Please Feel Free To Send Us A Message (Please Note: Due To The Impact Of Cov On Businesses Worldwide, We Are Working With Limited Work Force So It May Take Some Time To Respond To Your Queries. Current Response Time Is Approximately 1-3 Working Days).
Returns Are Accepted Within 30 Days At An Additional 15% Restocking Fee.
You Can Send The Parts Back To Us For A Replacement Or Full Refund. Goods Should Be Returned Back In Same Condition And Same Packing For A Full Refund. We Reserve The Right To Approve / Disapprove Any Return.
Please Note, Buyer Bears Any Return Import Duties Charged In India.
We Try Our Best To Keep Our Customers Happy But Problems Occur Unexpectedly Even After Our Strict Quality Control. Please Note, We Can Only Help You If You Co-operate With Us In Resolving The Problems. These Matters Take Time But We Try Our Best To Resolve All Issues As Quickly As Possible.
In Any Case, If The Goods Are Not As Expected Or Have Any Problem, Just Send Us A Quick Message With Pictures And We Will Try To Find A Solution As Quickly As Possible.
We Have Most Of The Products In Stock. Some Of Our Products Are Made To Order And Have A Dispatch Time Of 5 To 30 Working Days Depending On The Type Of Product And Previous / Pending Orders Regardless Of The Handling Time Mentioned. If You Need An Exact Dispatch Time, Please Contact Us Before Ordering. Please Ignore The Available Quantity Mentioned In Our Listings. This Is Mentioned So The Item Does Not End And Watchers Do Not Lose Link To The Listings.
All The Orders Are Professionally Packed In Cardboard / Metal Boxes With Foam / Bubble Padding To Avoid Damage To The Item/S During Shipment. We Check All Our Shipments Before Dispatch And We Are Not Responsible If The Shipment Is Received Damaged. Please Contact Us And We Will Try To Find A Solution For You. Transit Insuranc E Can Be Added At Additional Cost To Claim Damages To The Product (Contact Us For More Details).
In Most Cases Russia, Brazil, New Caledonia, Ukraine, Estonia, Lithuania, Latvia, Belarus, Azerbaijan, Kazakhstan, Mongolia, North Korea And More.
Please Note: Tracking Numbers Are Provided On Request Within 10 Days Of Dispatch. Unfortunately, Once A Package Leaves Our Country, The Tracking Number Is No Longer Updated And It Is Quite Literally Out Of Our Hands. It Also Depends Upon On How Long It Takes Your Country's Customs Office To Process Incoming Packages. In Rare Cases We Have Seen It Take Up To 70 Days. Also, Please Try Checking Your Local Post Office And Make Sure It Is Not Being Held For Customs / Import Duties. Supply Chain Service Has No Tracking Number Until It Reaches The Destination / Mid-way Forwarding Country Which Is Germany And The Uk.
Big Size Retail Shipments I.E. Body Kits / Products Over 25Kgs (Volumetric Weight) / 0.5 Cbm (Cubic Meters) Maybe Sent To Your Nearest International Airport Only / Through Supply Chain Service. You Will Have To Collect The Shipment From Airport. No Door Delivery Facility Available. Pick-up From Docks, Clearance Etc.
At Additional Costs. Please Contact For More Details On Freight.
Supply Chain Service - 15 To 30 Days Depending On The Destination Country.
Dhl Ecommerce / India Post - 15 To 50+ Days Depending On The Destination Country And Customs Procedures. You May Need To Contact Your Local Post Office For Updates.
Fedex / Aramex / Dhl / tnt / Ups - 7 To 15 Days.
Multiple Orders From Customer With Same Address Received Before The Dispatch Of First Order Will Automatically Be Combined In One Shipment Without Prior Notice.
However, We Will Do Our Best To Locate The Lost Shipment (We Will Require Your Patience To Get Any Information. Insura Nce Can Be Added At Additional Cost To Claim The Loss (Contact Us For More Details).
Note: We Do Not Ship To P.O. Box Addresses. For Russia, We Ship To Business Addresses Only, For Brazil We Will Require Cnpj Number. If We Do Not Receive Residential / Office Address Within 3 Days Of Ordering, We Will Ship The Item Whenever It Is Ready To The Given P.O. Box Address But In That Case, We Will Not Be Responsible For Any Loss Or Damage To The Item. We May Also Cancel The Order And Charge 15% Cancellation Fee If You Fail To Provide The Above.
You Can Send It To Us Through Ebay Messaging System After You Place The Order. We Will However Dispatch The Shipment When It Is Ready Even If We Do Not Receive The Phone Number.
Note: You May Need To Pay Import Duties In Your Country. It Can Range From 0% To 200% Or More Of The Total Cost Depending On Your Country's Customs Clearance System. Please Check With Your Import Authorities For Exact Details Before Ordering. We Are Not Responsible For Any Duties / Penalties Charged.
Note: Incase The Parcel Is Sent Back Due To Receiver Not Available, Refused By The Customer, Duty Unpaid, Wrong Address, Not Reachable Or Any Other Reason, We Will Not Be Responsible For Any Loss. We Ship To Paypal Addresses Only. If You Want Us To Send To Any Other Address, Please Change The Address In Paypal Before Ordering. Changes To Address After 48 Hours Of Ordering Will Fetch Additional Charge Of 35 Us Dollars.
We Deduct 15% Of The Total Amount Incase Of Cancelling The Order Without Reading The Information Mentioned In The Description Even If You Do It A Second After Ordering. We Reserve The Right To Cancel Any Order.
No Installation Instructions / Manuals Are Supplied With Our Products. None Of Our Products Come With Lights, Hardware, Grill / Mesh (Regardless Of Pictures Listed), Seat (Incase Of Rear Fenders) Etc. Since All Our Of Products Are Custom Made, They May Be Difficult To Install And You May Require Professional Help In The Installation Which May Incur Additional Cost (Sometimes Costing More Than The Product Itself). No Tuv Certificate / Any Other Documentation Is Provided For Automobile Authorities To Legalize The Use Of Our Products On Your Automobile.
Quality Of Our Products:
Our Fiberglass Products Are Made With The Best Quality Materials Sourced From Top 10 Companies Worldwide And With Processes Including Hand Lay-up As Well As Advanced Processes Including Vacuum Bagging, Vacuum Infusion, Scrimp, Rtm, Vartm, Lrtm, Out Of Autoclave Prepreg, Silicone Bagging, Ccbm Depending On The Type Of Product Being Manufactured. We Will Soon Be Offering Carbon Fiber Products Made Of Highest Quality Materials, Advanced Process And Finished To A High Level.
Fit And Finish:
Most Of Our Fiberglass Products Are Made By Hand-lay Process (95% Of The Products Are Made This Way All Over The World Includes Light Weight Aircrafts/Big Ships/Boats/Canoes And Parts For Buses/Trucks/Train/Cars/Motorcycles Etc.). Due To Being A Completely Manual Process, Chances Of Issues Are There. Note - There Are A Number Of Issues Which Are Present In Fiberglass Molded Products. Not Every Part Has All The Issues Or Same Issues With All Products (We Generally Do Not Have Issues With Our Products. Some Products Don't Have Any Issues At All Which Is What We Aim For But In Some Cases, There Maybe A Few Or One Or All Of The Issues Mentioned Here. Please Do Not Expect Them To Look / Work As Mass Produced Items Right Out Of The Box. Fiberglass Products Will Be Supplied Unpainted (Unless Mentioned) And In Gel-coat / Primer Finish (White / Black / Grey / Any Other Color) Regardless Of Pictures Listed. Actual Color / Finish Of The Item May Differ From Photos. Please Note: Gel-coat Is Purely A Sandable Surface And May Have Scratches (May Look Used But It Is Not). It Will Require Preppration/Prep-work, Paintjob, Sanding, Stretching/Compressing/Squeezing/Expanding Due To Warpage/Shrinkage And May Look Asymmetrical, Priming And Painting To Your Choice Of Color At Your Cost. Inner Surface Of The Parts May Look Bad / Unpleasing And May Require Prepration Work And Paintjob. You May Have To Do Any / Few / All Of The Following In Order To Make The Item Fit Your Application Perfectly Which Which May Require Professional Help And Can Attract Additional Charges To Be Paid (This Has To Be Paid By The Customer Only) Cutting / Grinding / Finishing / Trimming / Cutting Tail Light Slots / Filing / Increasing Hole Size / Bodywork - Includes Drilling Holes (We May / May Not Drill Holes Unless Indicated By Customer At The Time Of Ordering Regardless Of The Pictures) / Bondo Filling / Sanding / Scuffing / Scrubbing / Fiber Filling / More Material Adding Or Molding Etc. / Preparation/Prep-work / Polishing / Buffing / Gluing / Bonding / Fixing Broken Mounting Tabs / Relocation Of Broken/Bent Mounting Tabs/Brackets / Minor-major Modifications / Cleaning / Washing / Degreasing / Deburring / Other Forms Of Repairs / Adjustments / Lining Up, Customizing Oem/Original Or New Seats To Match With The Airbox Covers For Vrod Models, Additional Hardware - Nuts / Bolts / Washers / Spacers / Tabs / Lugs / Bungs / Rivets / Screws / Grills / Mesh / Custom Attachments Or Other Fittings To Be Able To Fit The Product And This Has To Be Done Before The Paintjob. Items May Have Scratches / Broken Areas / Pinholes / Scuff Marks / Burrs / Unfinished Edges Or Areas / Discoloration Of Surface Finish / Stars Or Spider Marks / Dents / Grease Marks / Fingerprints / Dust / Uneven Surface / Sagging / Porosity / Craters / Pock Marks / Fisheyes / Air Bubbles / Orange Peel / Surface Flakes / Wrinkles / Alligator Marks / Chalking / Fading / Spotting / Distortion Or Warping Or Deformation Or Wavy Surface / Lose Fibers / Loose Mounting Points / Dimples / Roughness / Release Or Delamination Of Surface Layer / Surface Defects / Mold Parting Lines Or Crease / Release Of Fibers / Water Spots / Resin Tearing / Blisters / Blushing / Heat Lines / Poor Flow Or Leveling / Air Pockets / Pre-release / Print Through Pattern On Surface From Fiber Reinforcement / Sticky Surface Or Inner Side / Uncured Surface Or Resin / Pits / Chips / Packaging Marks / Cracks / Stress Cracks Etc. All Of Which Are Common With Fiberglass Molded Products And Needs To Be Repaired / Finished Before Paintjob. Most Of The Issues Mentioned Above Means The Same With Different Names. Not All Parts Have Issues.
We Also Offer Complete Finishing System From Sanding, Priming And High Quality Standard And Custom Paintjobs, Hydrographics, Electroluminiscent Paint, Spray Chrome, Heat Sensitive Paint, Neon Paint, Glow In The Dark Paint, Silver/Gold Leafing, Pinstriping Etc. Check With Us Before Ordering. In Painted / Finished Products, We Will Take Care Of Surface Defects And Prep-work (Drilling / Adjustments/Modifications May Still Be Required).
Parts Listed With The Name Of Carbon Fiber Are Carbon Fiber Hydrographics Film Coated And Not Real Carbon Fiber.
Since The Parts Are Custom Made, You May Need To Modify / Cut Your Original Bike Frame Sections / Other Areas Of The Bike, Dismantling / Dis-assembling / Removal / Replacement / Relocation Parts Of Your Bike Or Other Work Which May Require Professional Help And Cost More Money.
Our Vrod Rear Fenders Will Fit All Vrods Made After 2002 With 240Mm Or Wider Tires.
Vrod Side Covers Will Require Removal Of Fuel Tank To Be Able To Fit Properly To The Frame Alongwith Additional Double-sided Tape Etc.
Vrod Airbox Covers May Require Cutting Your Original Velocity Stacks Or Require New Shorter Air Filter.
Front Fenders For Vrods Will Require Extension Brackets To Be Fabricated And Molded / Fixed To The Front FENDER Supplied.
Some Airbox May Reduce Your Handlebar Turning Radius Due To The Wide Shape / Design Of The Product.
All Our Airbox Covers Will Fit All Vrod Models Including Night Rod, Muscle Etc. From 2002-2017. Muscle Models May Require Replacing The Speedometer / Instrument Gauge / Cluster Or Cutting The Airbox Cover To Accommodate Muscle Speedometer Unit.
Cnc Cut Metal Trims May Have Small Penetration Mark From The Laser Cutting Machine.
Headlight Fairings May Have Loose / Broken Mounting Tabs, Fiber/Resin/Bondo/Putty Build-up Which May Not Look Pleasing And May Require Fixing.
Bagger Overlay Side Covers Will Require Gluing, Bonding, Sanding, Prepration Work Which May Cost A Lot Of Time And Money.
Bagger Body Parts Including Tank Covers, Side Covers, Rear FENDER And Saddlebags May Not Align Properly.
Bagger Tank Dash Will Need Custom Tank Covers To Be Able To Fill The Gap Between The Dfash Cover And Tank.
Softail M8 Side Covers Will Fit All 2018+ Softail Models With Air Ride Kits / Relocation Of Tensioner Knob From The Right Side.
Softail M8 Rear Fenders Will Not Come With The Tank Gap Fillers (Regardless Of The Listed Pictures).
Cast Metal Parts May Have Casting Flaws I.E. Dings, Dents, Potholes, Marks & Imperfections, Polishing Compound Residue Etc. And Each One Is Slightly Different. May Not Look As Photos.
Metal Parts Will Come In Unpainted / Unfinished Condition / Surface Oxidation (Rust) Or We May Also Primer The Parts Unless Mentioned In The Listing Regardless Of The Listed Pictures. Chrome / Nickel Etc. Plated Or Powder Coated Parts May Also Have Surface Rust. Inside Of The Metal Parts May Require Sealing Before Paintjob Or Fitting To The Motorvcycle. Stainless Steel Products Tend To Change Color With Heat. Our Stepped Exhaust Headers Are Made Using Different Size Tubing Which Requires Welding Between Each Joint.
Our Products Are Mostly Used For Show Purpose And We Are Not Responsible If Something Breaks / Fails Claiming Human Life Or Injuries While Riding / Installation (Professional Installation Is Always Advised). We Work With Only The Best And Tested Suppliers But Since The Parts Are Handmade, They Do Not Undergo Strict Quality Control System Like Mass Produced Products. Buy And Use At Your Own Risk Only. Please Check With Your Own Authorities For Any Additional Documentation / Approval Required To Use The Product In Your Location. We Are Not Responsible For Any Fine Caused By Using Our Product Without An Approval.
We Are Not Liable For Refund In Any Of These Cases Regardless Of Ebay Buyer Protection Policies. By Ordering Our Products, You Are Accepting Everything That Is Mentioned In This Description And Allowing Ebay To Disregard Their Policies For Any Order Placed With Us.
We Accept Paypal As It Is The Most Trusted Way To Send Payments Securely Internationally. E-cheque Payments Through Paypal Will Fetch Delay In Shipment Until The Funds Are Cleared In Our Accounts
Your Feedback Is Important To Us So Our Customers Can Know More About Our Products And Services. We Strive For 100% Customer Satisfaction As Well As 5-star Feedback And Rating In Every Category.
We Are Open To Suggestions. Feel Free To Send Us Any Suggestion Regarding Our Products / Description Etc. And Help Us Improvise. Your Inputs Are Important To Us.
Drop-shippers / Dealers / Distributors:
We Retail And Wholesale And We Would Be Happy To Develop International Dealers & Distributors. Contact Us For More Information.
People Who Would Feature Our Products On Their You-tube Channel / Insta-gram Page / Face-book Page With Atleast 1000 Subscribers/Followers Can Ask For Special Discounts.
Check Out Our Other Quality Made Products By Clicking The "See Other Items" Link / Store Logo On The Right Side Of This Page Under Our Ebay User Id.
Please Add Us To Your Favorites / Follow Our Id For Regular Updates On Our Products. We Are Constantly Adding New Prodcuts For Vintage And Classic Motorcycles, Bobbers, Choppers, Baggers, Cafe Racers, Street Bikes, Hot Rods And More...
Feel Free To Contact Us Anytime If You Have Any Questions. We'd Be Glad To Answer All Your Queries.
We Would Appreciate If You Could Spread A Word About Our Company Among The Bike Clubs, Face-book, Insta-gram Parts Traders, Bike Shows Etc. So We Can Help More People & Enthusiasts Like You Make Their Machines Stand Out With The Unique Products We Offer.
**All Rights Reserved. No Part Of This Description And Pictures On This Page May Be Reproduced, Distributed, Used For Commercial Purpose / Listings By Other Ebay User Id Or Website, Or Transmitted In Any Form Or By Any Means, Including Photocopying, Recording, Or Other Electronic Or Mechanical Methods, Without The Prior Written Permission**
* Disclaimer *
Some Well Known Brand Names Are Mentioned In The Listing So Customers Can Find Products Quickly And Know The Item Can Fit / Can Be Made To Fit Their Vehicle.
We Are A Trading Company And All The Products We Have Listed Are Made / Supplied By Third Parties Only. We Do Not Have Any Control Over Production Of Any Patented / Branded / Trademarked Products By A Third Party. All The Products, Pictures, Logos, Titles And Information Are Given By Third Parties.
We Are In No Way Liable If Any Of The Items Listed In Our Store Break Any Copyright / Patent / Trademark Law.
All Cases Are Subject To Be Settled Under Faridabad, Haryana, India Jurisdiction Only With Our Selection Of Arbitrator.
...We Wish You A Great Day And Expect Your Visit Again At Our Store...
|All orders from same customers are combined
|May need Trimming,Filling,Repairs,Mods,Adjustments
|Country/Region of Manufacture
|Fiberglass (FRP) parts:
|Study working & Issues with fiberglass before order
|May come powdercoated/bare with surface rust
|Not Available (Guide/Manual/Photos etc.)
|Cardboard Box / Postal Bag
|Body & Frame
|Number of Pieces
|Nut,Bolt,Grill,Light not included with the order
|CNPJ Number is required
|Manufacturer Part Number
|Does Not Apply
|Discounts Available For:
|Professional Shop Installation Recommended
|No refund for:
|Unpaid import fee,Wrong address,Buyer didnt accept
|Address Change Charges:
|7-30 days plus dispatch time
|Preparation Work (Ready to paint finish)
|Contact for more information
|We Are Open To Suggestions
|Please ask any questions before ordering
|Number of Pieces:
|Additional Postage maybe charged:
|For some countries, remote locations, Islands etc.
|Self-Drill (Some parts may come pre-drilled)
|30 day period, @15% fee, Paid & Arranged by customer only
|Carbon Hydrodip/Painting,Chrome@additional cost
|Provided after 72 hours of dispatch time / earlier
|Only to Business addresses
|Custom Made Parts. We are free from any liability
|Maybe charged by your country's import office
|Buyer Ordering Our Products:
|You accept over-riding Buyer Protection Policies
|Black/White/Grey/Bare (Requires painting)
|@ Additional 18% of the total value
|1-20 days (Most of the times, parts are in stock)
|Mail Response Time:
|1-4 working days
|At 20% additional fee even if cancelled within 1 second
|P.O. Box Shipping: